Analysis by Valery Grin · · updated May 29, 2026
BBQ Future Half-Moon Ceramic Heat Deflectors (Kamado Joe Classic I/II/III, 2-pack)
Pair of ceramic deflector plates for indirect cooking — budget alternative to the OEM heat deflector
From€37
Reference price on Amazon (June 2026) · subject to change
As an Amazon Associate, mikamado.es earns from qualifying purchases. At no extra cost to you.
- Material
- Cerámica refractaria
Quick answer
The BBQ Future Half-Moon Ceramic Heat Deflectors are an honest budget alternative to the official Kamado Joe Classic heat deflector. They're a pair of half-moon refractory ceramic plates for indirect cooking on Classic I/II/III: they perform the same job as the OEM part, blocking direct heat and creating a convection oven for indirect and smoking, at a sensible price. They're for Classic I/II/III owners who need a replacement deflector or a second set without paying for the official part. Skip them if you have a Big Joe (the geometry is larger) or demand the exact factory thickness and warranty.
A pair of half-moon ceramic plates for indirect cooking on Kamado Joe Classic I, II and III. The budget alternative to the OEM heat deflector: same job — block direct heat and create a convection oven — at a fraction of the cost.
On any kamado the heat deflector is the piece that separates a direct sear from low-and-slow. BBQ Future copies the half-moon geometry of Kamado Joe's Divide & Conquer in decent-grade ceramic and sells it as a pair, so you cover the full footprint. It isn't the factory part — thickness and finish are a touch lower — but for indirect roasting, smoking and pizza it does the job.
An honest budget alternative to the OEM Kamado Joe Classic heat deflector. Not the factory part, but it delivers for indirect cooks and smoking at a sensible price.
Pros
- Half-moon geometry native to the Classic's Divide & Conquer
- Full pair — you cover the entire indirect cooking footprint
- Ceramic that handles the kamado thermal cycle without cracking easily
- A fraction of the price of the official Kamado Joe heat deflector
Cons
- Not the factory part — thickness and finish are slightly lower
- Classic only — the half-moon won't fit a Big Joe
- Generic ceramic can stain and micro-crack under heavy use
Who it's for
For Kamado Joe Classic I/II/III owners who need a spare deflector or a second set without paying for the OEM piece.
Not for
If you own a Big Joe (larger geometry) or demand the exact thickness and warranty of the factory part, this isn't for you.
Specifications
- Material
- Cerámica refractaria
As an Amazon Associate, mikamado.es earns from qualifying purchases. At no extra cost to you.
Goes well with
FAQ
Do these half-moon deflectors fit my Kamado Joe Classic?
Yes, they are sized for the 18" Kamado Joe Classic I, II and III. They replace the original Divide & Conquer ceramic pieces for indirect cooking, and since they come as a pair you can run one half over direct heat and the other indirect in the same session.
Why half-moon ceramic instead of a single round piece?
Splitting it into two halves is what gives you versatility: you can fit just one half-moon and leave the other side open to sear over direct heat while the rest cooks indirect. A full round plate forces all-or-nothing. It is the same principle as the Kamado Joe Divide & Conquer system.
Does the ceramic crack with temperature swings?
Like all refractory ceramic, hairline cracks from thermal shock are normal over time and do not affect performance. To extend their life, heat the kamado gradually and never pour cold liquid onto the hot piece. Store them dry so they do not absorb moisture.
YOU MIGHT ALSO LIKE
Go deeper
- RECIPE
Reverse-sear duck magret with crackling skin
Two 380 g duck magrets, diamond scoring on the skin, 15 minutes at 120°C indirect and a f…
- RECIPE
Levante-style smoked leg of lamb
A boneless leg of lamb, marinated in rosemary, lemon and Costa Blanca olive oil, smoked o…
- KAMADO
Kamado Joe Classic III 18"
The 18" kamado these half-moons are sized for.